Super Finishing attachment devices offer the possibility of carrying out quality-improving or structuring precision surface-machining operations cost-effectively on a lathe / cylindrical grinding machine or on a CNC machine. Once the work piece has been hard turned, the attachment device is clamped onto the supporting machine and the Super Finishing machining is carried out as a final operation. This process step can also be done directly after hardening, so that a lathe equipped in this way functions as a Super Finishing machine for individual parts or small lots.
The work piece is rotated and the attachment device is operated via the supporting machine, while the oscillation of the tool and the contact pressure are regulated by the control unit of the attachment device. Depending on the device, the oscillation frequency can be up to 2,000 double strokes per minute. All rotationally symmetrical work pieces of any hardness that can be fixed between spikes can be processed this way. Even big calendar rollers in the paper, textile and plastics industries can be finished with the devices in their installed state and thus reconditioned
Oscillation frequency : 0 – 1400 double strokes per minute
Oscillation : standard +/- 1 mm, optional +/- 0.5; +/- 1.5; +/- 2 mm
Tape feed rate : 10 – 100 mm/min
Contact stroke : 50 mm
Contact pressure : 1-6 bar
Tape contact roller width : max 50 mm
Tape contact roller hardness : Standard 65 ShA, optional 35, 50, 90 ShA
Control voltage : 24 VDC
Oscillation frequency : 0 – 2,000 double strokes per minute
Oscillation : Standard +/- 0 – 2,5 mm
Tape feed rate : 10 – 100 mm/min
Contact stroke : 50 / 100 mm
Contact pressure : 1 – 6 bar
Tape contact roller width : 100 mm
Tape contact roller hardness : Standard 65 ShA, optional 35, 50, 90 ShA
Control voltage : 24 VDC
